A barred tee is a tee or a fitting with a branch used in pipelines that is pigged and has a restriction bar welded internally preventing the pig from traveling down a branch connection. The bars are installed so they are flush with the inside diameter of the pipeline to keep the pig from hanging up when it …
Products Categorie Archives:
Equal Tee
The most common pipe fitting, is used to combine (or divide) fluid flow. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Available in a variety of materials, sizes and finishes, they may also be used to transport two-fluid mixtures. Tees may be Equal Tee or Unequal …
180° Elbow
Is a pipe fitting which is widely used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 180 degree. Elbows are also commonly referred to as bends, and are available in a range of materials such as nickel …
90° Elbow
This is a fitting device which is bent in such a way to produce 90-degree change in the direction of flow of the content in the pipe. An Elbow is used to change the direction in piping and is also sometimes called a “quarter bend”. A 90-degree elbow attaches readily to Carbon Steel, Alloys Steel, …
45° Elbow
45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect pipes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in …