TEE
Tee welding joints are formed when two pieces intersect at a 90° angle, which results in the edges coming together in the centre of a plate or component in a ‘T’ shape. Tee joints are considered to be a type of fillet weld, and they can also be formed when a tube or pipe is welded onto a base plate. Welded tees are used to create derivations on the main pipe. They are made from electrically welded pipes and from plates for larger diameters. Fitting Service offers standard tees, creating a side deviation from the pipe, while keeping the whole section unchanged. Tee branch connection is weakened because of its complicated stress distribution; therefore, it is necessary to provide added reinforcement when the tee is under much pressure. Generally, there are three kinds of reinforcement methods, they are reinforcing pad, single-reinforcement and reinforcing saddle. Equal Tee fittings allow for the connection of two horizontal and one vertical pipe. Equal Tee and Equal Cross products are expertly engineered using cutting-edge technology and are widely used in a variety of piping systems in a variety of industries.
Enquiry NowWelded Reducing Tee is produced by Nascent Fittings with a branch outlet smaller than the run. Equal Tee and Equal Cross Fittings are available in a variety of sizes, making them ideal for interconnects that are constrained by space constraints. Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee both are used to divide the pipelines to adjust the flow rate and change the direction. Nascent fittings are Manufacturers of Welded Fittings Tee and Supply high quality Tee which offer you the best prices in the market. Welded Fittings Tee are used only in conjunction with ASME Pipe. Welded Fittings Tee Covers the Pressure, Tolerances, Dimensions, Temperature Ratings, Marking and Material Requirements for Welded Fittings Used in High-pressure Applications.
CARBON STEEL SPECIFICATIONS:
- Size : 2″ to 80″NB , ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Carbon Steel : ASTM A 234 WPB, IS 1239 PART II
- Carbon Steel : DIN Standard – EN 10253-2 – P235TR2/P265TR2/P235GH/P265GH/P355N/P355NH
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
ALLOY STEEL, & LTCS SPECIFICATIONS:
- Alloy Steel : ASTM A 234, WP5, WP9, WP11, WP12, WP91
- Low Temp. CS : ASTM A-420 WPL6
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
STAINLESS STEEL SPECIFICATIONS:
- Size : 2″ to 80″NB, ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Stainless Steel : ASTM A 403 WP – TP 304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904L / XM19
- Stainless Steel : DIN Standard EN 10253-4 / 10222-5 1.4301/1.4307/1.4401/1.4404/1.4529/1.4571/1.4541/1.4410/1.4550/1.4335/1.4539
DUPLEX STEEL & COPPER NICKEL SPECIFICATIONS:
- Size : 2″ to 48″NB , ANSI/ASME B 16.9, MSS-SP-75
- Schedule :10/20/40/80/100/120/160/XXS
- Duplex Steel : ASTM A815- UNS S31803, S32205, S32750, S32760
- Copper Nickel : C70600(90:10), C71500(70:30), C71640
NICKEL ALLOYS SPECIFICATIONS:
- Size : 2″ to 48″NB , ANSI/ASME B 16.9
- Schedule :10/20/40/80/100/120/160/XXS
- Nickel : UNS N02200, N02201
- Monel : UNS N04400, N05500, Alloy 20
- Inconel : UNS N06600, N06601, N006625, N08800, N08810, N08825
- Hastelloy : UNS N10276, N06022, N10665, N06455
- SMO 254 Grade UNS S31254
- Aluminum – ASTM / ASME SB361 – 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
- Titanium – ASTM / ASME SB363 – Gr1, Gr2, Gr5, Gr7, G9, Gr12, Gr23
TEST CERTIFICATE:
- Manufacturer test Certificate En 10204 3.1 & 3.2
- Radiography – 100% R.T. OK
- TPI Inspection release note (as per customer requirement)
ELBOW
Posted
Job Description
Tee welding joints are formed when two pieces intersect at a 90° angle, which results in the edges coming together in the centre of a plate or component in a ‘T’ shape. Tee joints are considered to be a type of fillet weld, and they can also be formed when a tube or pipe is welded onto a base plate. Welded tees are used to create derivations on the main pipe. They are made from electrically welded pipes and from plates for larger diameters. Fitting Service offers standard tees, creating a side deviation from the pipe, while keeping the whole section unchanged. Tee branch connection is weakened because of its complicated stress distribution; therefore, it is necessary to provide added reinforcement when the tee is under much pressure. Generally, there are three kinds of reinforcement methods, they are reinforcing pad, single-reinforcement and reinforcing saddle. Equal Tee fittings allow for the connection of two horizontal and one vertical pipe. Equal Tee and Equal Cross products are expertly engineered using cutting-edge technology and are widely used in a variety of piping systems in a variety of industries.
