Long Radius Bend
U Pipe Bend
The u pipe bends are used to reverse the direction of piping in piping systems. In cooling systems and heating systems the pipes often go up and down in direction. To make these structures, the bends are extremely necessary and useful. The U Pipe bend Manufacturer in India could be short or long, and the material grades can differ. The U Bend Pipe Fitting varies in diameter with the applications. There are pipes manufactured in duplex steel as well. The U type bend pipe has the advantage of distributing the pressure and momentum along the bent surface of the bends so that the gradual execution of stabilization occurs. The U Bends Pipe products manufactured by us are of superior quality. These piping require the duplex steel 180-degree U shape pipe elbow or bends to make the turn. To keep the strength and integrity of the piping intact, the same material grade bends or elbows are used. Bends differ from elbows mainly in the shape that the bends are gradual turns where the elbows are of sudden turning.
Enquiry NowNascent is a leading manufacturer and exporter of Stainless-Steel U-Bend fittings that are being designed as per the national and international standard quality of raw materials and thus making sure of their durability and high quality. Nascent provides to its clients a wide range of U Bend that are manufactured from quality raw materials. Offered in varied sizes, these are widely used in various refineries and thermal & nuclear power plants. Even U Bend are available in varied sizes and are corrosion resistant, heat resistant as well as are easy to install.
CARBON STEEL SPECIFICATIONS:
- Size : 1/2″ to 36″NB , ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Carbon Steel : ASTM A 234 WPB, IS 1239 PART II
- Carbon Steel : DIN Standard – EN 10253-2 – P235TR2/P265TR2/P235GH/P265GH/P355N/P355NH
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
ALLOY STEEL, & LTCS SPECIFICATIONS:
- Alloy Steel : ASTM A 234, WP5, WP9, WP11, WP12, WP91
- Low Temp. CS : ASTM A-420 WPL6
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
STAINLESS STEEL SPECIFICATIONS:
- Size : 1/2″ to 36″NB, ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Stainless Steel : ASTM A 403 WP – TP 304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904L / XM19
- Stainless Steel : DIN Standard EN 10253-4 / 10222-5 1.4301/1.4307/1.4401/1.4404/1.4529/1.4571/1.4541/1.4410/1.4550/1.4335/1.4539
DUPLEX STEEL & COPPER NICKEL SPECIFICATIONS:
- Size : 1/2″ to 24″NB , ANSI/ASME B 16.9
- Schedule :10/20/40/80/100/120/160/XXS
- Duplex Steel : ASTM A815- UNS S31803, S32205, S32750, S32760
- Copper Nickel : C70600(90:10), C71500(70:30), C71640
NICKEL ALLOYS SPECIFICATIONS:
- Size : 1/2″ to 24″NB , ANSI/ASME B 16.9
- Schedule :10/20/40/80/100/120/160/XXS
- Nickel : UNS N02200, N02201
- Monel : UNS N04400, N05500, Alloy 20
- Inconel : UNS N06600, N06601, N006625, N08800, N08810, N08825
- Hastelloy : UNS N10276, N06022, N10665, N06455
- SMO 254 Grade UNS S31254
- Aluminum – ASTM / ASME SB361 – 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
- Titanium – ASTM / ASME SB363 – Gr1, Gr2, Gr5, Gr7, G9, Gr12, Gr23
TEST CERTIFICATE:
- Manufacturer test Certificate En 10204 3.1 & 3.2
- IBR Test Certificate Form IIIC
- TPI Inspection release note (as per customer requirement)
3D Pipe Bend
Posted
Job Description
The u pipe bends are used to reverse the direction of piping in piping systems. In cooling systems and heating systems the pipes often go up and down in direction. To make these structures, the bends are extremely necessary and useful. The U Pipe bend Manufacturer in India could be short or long, and the material grades can differ. The U Bend Pipe Fitting varies in diameter with the applications. There are pipes manufactured in duplex steel as well. The U type bend pipe has the advantage of distributing the pressure and momentum along the bent surface of the bends so that the gradual execution of stabilization occurs. The U Bends Pipe products manufactured by us are of superior quality. These piping require the duplex steel 180-degree U shape pipe elbow or bends to make the turn. To keep the strength and integrity of the piping intact, the same material grade bends or elbows are used. Bends differ from elbows mainly in the shape that the bends are gradual turns where the elbows are of sudden turning.
